Technical articles

3 Ottobre 2018

Tall timber building: what’s your opinion?

After the exponential growth of CLT  production and the sprawling of multistory timber buildings all over world, the target seems to move toward tall timber constructions. […]
1 Luglio 2018

Timber buildings: how long do they last? (Part 1)

One of the most common questions we are asked is this: “How long does a wooden building last?”. The answer of the question is complex and […]
15 Giugno 2018

CLT oversea: Find out how we did it!

In this article we will try to highlight the main aspects and limits of container transport based on our experience gained on oversea sites.
16 Maggio 2018

Connection between platform frame walls and concrete using hold-downs

The correct design of a frame building involves a series of precautions necessary in order to guarantee the fulfillment of the static requirements in compliance with […]
9 Aprile 2018

Window-wall detail

The window is a weak point in the envelope of the building and must therefore be considered very carefully during the design phase keeping in mind […]
12 Gennaio 2018

Wood Control – Monitoring moisture content

“is early identification and reporting of this problem possible, before the situation gets out of hand?”.
18 Dicembre 2017

How to see the noise: Beamforming

Failure to comply with acoustic parameters is often the subject of legal disputes but above all searching “in the dark” to identify the source and solve the problem.
18 Dicembre 2017

Wood, durability and monitoring

Wood and durability: how can we sleep peacefully? It would take and active 24/7 monitoring system that will alert the user of critical situations due to […]
8 Novembre 2017

7 golden rules for flat roof

It should be emphasized immediately that waterproofing is the most important aspect for flat roofs and must always be guaranteed. Workmanship and quality control are therefore […]
2 Ottobre 2017

Complex Geometries; From Design to Reality

Great Architects such as the late Zaha Hadid saw natural structures as structures made from extremely complex geometries. Obviously, credit goes to those who have the […]
29 Settembre 2017

1+1+1+1+1 ≠ 5 !?

Hold-down brackets (preventing up lift of walls) and square steel plates (preventing lateral translation of walls) are used to transfer lateral loads acting on walls. Hold-down […]
3 Febbraio 2017

Wooden Buildings: what is your opinion?

Caricamento in corso…
19 Novembre 2016

Xlam: evaluation of the correct stiffness matrix

Xlam or, more correctly, Cross Laminated Timber (CLT), is a material composed of a minimum of three layers of wooden boards, glued one perpendicular to the […]
3 Novembre 2016

Air tightness of timber buildings: a critical and underrated issue! – Part 1

When it comes to designing timber buildings, it is very likely to deal with the question of air tightness. What do we mean by that? Air […]
21 Agosto 2016

A new challenge in design: BIM (Part 2: the ifc format)

In our last post, we have dealt with BIM and introduced its potentialities in the field of timber constructions. Today we are going to discuss the […]
Newsletter subscription
Follow us on Linkedin!

Linkedin is our professional social network.

Keep in touch with us!